<?xml version="1.0" encoding="UTF-8"?>
<root>
  <product>
    <product_id>49</product_id>
    <product_title><![CDATA[Bosch LSU 4.9 Wideband 5 wire Lambda Sensor]]></product_title>
    <product_content><![CDATA[The Bosch LSU 4.9 sensor is a 5 wire wideband Lambda sensor. It is used to control fuel and ignition systems to optimize a car's performance in the areas of emissions and fuel economy. The Lambda sensor can be connected directly to any MoTeC ‘hundred series’ ECU with a Lambda upgrade enabled. It can also be connected via the PLM to any ECU or Dash Logger. Lambda gives a measure of the Air to Fuel Ratio (AFR) that is independent of the type of fuel being used.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/49/image_display-(3).jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>207.7800</product_price>
    <product_price_ex_tax>188.89090909091</product_price_ex_tax>
    <product_price_local_tax>207.7800</product_price_local_tax>
    <product_created_datetime>2022-11-18 01:45:21</product_created_datetime>
    <product_code>57006</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>4</product_inventory_level>
    <product_uri>/products/motec-bosch-lsu-49-wideband-5-wire-lambda-sensor-57006/</product_uri>
  </product>
  <product>
    <product_id>48</product_id>
    <product_title><![CDATA[Motec LTC (Long)]]></product_title>
    <product_content><![CDATA[MoTeC’s LTC (Lambda to CAN) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a CAN bus. When multiple LTCs are used, up to 32 Lambda sensors can be configured on a single CAN bus, allowing an ECU or logging device to simultaneously monitor numerous Lambda sensors. NOTE: MoTeC’s LTC is also available in a dual version, [LTCD](https://www.motec.com.au/ltcd/)## Sensors compatibility Bosch LSU 4.9, 5 wire sensor # BASIC SPECIFICATIONS ## Inputs/Outputs 1 x Bosch LSU 4.9 Lambda sensor Power supply voltage 11 V – 16 V Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to 2 A on startup) ## Communications 1 x CAN at 1 Mbit/sec ## Connectors 1 x 4 pin male DTM connector (power/CAN) 1 x mating connector for Bosch LSU 4.9 sensor ## Physical Dimensions 38 x 26 x 14 mm excluding wiring looms and connectors Weight 62 grams Maximum ambient temperature 100 °C]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/48/image_display-(2).jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>570.1500</product_price>
    <product_price_ex_tax>518.31818181818</product_price_ex_tax>
    <product_price_local_tax>570.1500</product_price_local_tax>
    <product_created_datetime>2022-11-18 01:42:14</product_created_datetime>
    <product_code>61300L</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>1</product_inventory_level>
    <product_uri>/products/motec-motec-ltc-long-61300l/</product_uri>
  </product>
  <product>
    <product_id>47</product_id>
    <product_title><![CDATA[Motec LTC]]></product_title>
    <product_content><![CDATA[MoTeC’s LTC (Lambda to CAN) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a CAN bus. When multiple LTCs are used, up to 32 Lambda sensors can be configured on a single CAN bus, allowing an ECU or logging device to simultaneously monitor numerous Lambda sensors. NOTE: MoTeC’s LTC is also available in a dual version, [LTCD](https://www.motec.com.au/ltcd/)## Sensors compatibility Bosch LSU 4.9, 5 wire sensor # BASIC SPECIFICATIONS ## Inputs/Outputs 1 x Bosch LSU 4.9 Lambda sensor Power supply voltage 11 V – 16 V Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to 2 A on startup) ## Communications 1 x CAN at 1 Mbit/sec ## Connectors 1 x 4 pin male DTM connector (power/CAN) 1 x mating connector for Bosch LSU 4.9 sensor ## Physical Dimensions 38 x 26 x 14 mm excluding wiring looms and connectors Weight 62 grams Maximum ambient temperature 100 °C]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/47/image_display-(2).jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>570.1500</product_price>
    <product_price_ex_tax>518.31818181818</product_price_ex_tax>
    <product_price_local_tax>570.1500</product_price_local_tax>
    <product_created_datetime>2022-11-18 01:39:56</product_created_datetime>
    <product_code>61300</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>4</product_inventory_level>
    <product_uri>/products/motec-motec-ltc-61300/</product_uri>
  </product>
  <product>
    <product_id>46</product_id>
    <product_title><![CDATA[Motec 15 Button Keypad]]></product_title>
    <product_content><![CDATA[For the ultimate in power management, combine the reliability of a [PDM](https://www.motec.com.au/powerdistribution) with the simplicity and flexibility that a keypad delivers. MoTeC Keypads work specifically with the current range of MoTeC Dashes and PDMs. Keypads are easy to program and feature CAN bus capabilities. Each switch and its 3 LEDs can be independently programmed. One option is to use the LED illumination to clarify the status of the PDM-assigned device. Example:LED 1: Power status LED 2: Re-try power-up LED 3: Failed power-up attempts Complete the keypad customisation by applying the desired semi-transparent label to each backlit button.# FEATURES A MoTeC Keypad will enhance the application and integration of a MoTeC PDM into any vehicle. Specific features include:Compact and lightweightRugged design for use in extreme environments, sealed to IP67 Backlit customised graphical symbols available Real time feedback via LED indicators above each button Simplified wiring, only 4 wires required for multiple buttons Short circuit, reverse polarity protection #### There are two sizes available: 8 button, 2 rows of 4 buttons (Part Number: 41401) 15 button, 3 rows of 5 buttons (Part Number: 41400) # KEYPAD CUSTOMISATION MoTeC keypads are tailored to work with MoTeC products. These keypads are then further customised by the user to create an individualised, application-specific device. ## CHOOSE. You customise the appearance of the backlit keypad buttons by applying your selection of the wide variety of pre-designed semi-transparent tactile labels supplied. ## CONFIGURE. You customise the functionality of each button using PDM Manager Software. The illumination of the keypads LEDs can be programmed to clarify the subject status.## CREATE. The resultant creation is a keypad tailored to suit specific individual requirements.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/46/image_display-(1).jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>684.1700</product_price>
    <product_price_ex_tax>621.97272727273</product_price_ex_tax>
    <product_price_local_tax>684.1700</product_price_local_tax>
    <product_created_datetime>2022-11-18 01:33:02</product_created_datetime>
    <product_code>41400</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>0</product_inventory_level>
    <product_uri>/products/motec-motec-15-button-keypad-41400/</product_uri>
  </product>
  <product>
    <product_id>45</product_id>
    <product_title><![CDATA[Motec GPS-L10]]></product_title>
    <product_content><![CDATA[The GPS-L10 is a 10 Hz GPS which combines the electronics and antenna into one small unit. It provides speed and position information, as well as altitude, heading, date, time and GPS statistics. A highly sensitive receiver allows the GPS to lock onto signals even in difficult environments.(See also [GPS-L10](https://www.motec.com.au/s-ac-gps/gp-gpsl10-ov/))This unit is suitable for [speed, position and lap timing](https://www.motec.com.au/aboutgps/gpsoverview/).## Compatible with MoTeC 'Hundred Series' [ECUs](https://www.motec.com.au/aboutecu/ecumodels/) - M400, M600, M800, M880 (v3.51U2 and up)MoTeC [M84](https://www.motec.com.au/m84) ECU (v1.10K2 and up)Motec M1 ECU Motec C1** Displays # SPECIFICATIONS## Performance Update rate 10 Hz66 satellite channelsDynamics 4 GPower supply voltage 4.0 – 6.0 V## Communications RS232 Baud rate: 38400 ## Physical Case size 48 mm x 41 mm x 14 mmWeight 109 g1 x 4 pin Deutsch DTM, 3 m flying leadBuilt in antennaMounting - magnetic base]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/45/image_display.jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>125.1200</product_price>
    <product_price_ex_tax>113.74545454545</product_price_ex_tax>
    <product_price_local_tax>125.1200</product_price_local_tax>
    <product_created_datetime>2022-11-18 01:30:10</product_created_datetime>
    <product_code>41304</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/motec-motec-gps-l10-41304/</product_uri>
  </product>
  <product>
    <product_id>8</product_id>
    <product_title><![CDATA[Motec SLM-C]]></product_title>
    <product_content><![CDATA[The Club Shift Light Module (SLM-C) provides eight fixed colour LED indicator lights in a compact array. The lights are arranged in a pre-defined shift light pattern. The colour intensity of the LEDs can be set to your preference. The SLM-C is connected via CAN eliminating the need to use auxiliary outputs.The SLM-C is available as part of a kit solution:[CDL3 Track Logging Kit](http://www.motec.com.au/cdl3trackkits/cdl3trackkitsoverview/) [CDL3 Track Display Kit](http://www.motec.com.au/displayscdl3trackkits/displayscdl3trackkitsoverview/) ## Compatible with [C1 Series](https://www.motec.com.au/c1series/) Displays, Any MoTeC Dash Logger [L1 Series](https://www.motec.com.au/l1series/) Loggers M84 and "Hundred Series" ECUs: M400, M600, M800, M880 # SPECIFICATIONS## LEDs8 colour (RGB) LEDs## Communications CAN ## Physical Case size 81.2 x 19.0 x 16.0 mm 1 x 4 pin Deutsch DTM connector, flying lead]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/8/image_display-(1).jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>266.0700</product_price>
    <product_price_ex_tax>241.88181818182</product_price_ex_tax>
    <product_price_local_tax>266.0700</product_price_local_tax>
    <product_created_datetime>2022-11-14 11:14:04</product_created_datetime>
    <product_code>18122</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/motec-motec-slm-c-18122/</product_uri>
  </product>
  <product>
    <product_id>5</product_id>
    <product_title><![CDATA[Motec LTCD]]></product_title>
    <product_content><![CDATA[MoTeC’s LTCD (Lambda to CAN Dual) modules monitor, control and diagnose Bosch LSU 4.9 Lambda sensors, transmitting readings on a CAN bus. When multiple LTCDs are used, up to 32 Lambda sensors can be configured on a single CAN bus, allowing an ECU or logging device to simultaneously monitor numerous Lambda sensors. NOTE: MoTeC’s LTCD is also available in a singular version, [LTC](https://www.motec.com.au/ltc/) ## Sensors compatibility Bosch LSU 4.9, 5 wire sensor # BASIC SPECIFICATIONS ## Inputs/Outputs 1 x Bosch LSU 4.9 Lambda sensor Power supply voltage 11 V – 16 V Power supply current 110 mA typical plus the sensor heater current (heater current is typically 0.5 A – 1 A and up to 2 A on startup) ## Communications 1 x CAN at 1 Mbit/sec ## Connectors 1 x 4 pin male DTM connector (power/CAN) 2 x mating connector for Bosch LSU 4.9 sensor ## Physical Dimensions 38 x 26 x 23.5 mm excluding wiring looms and connectors Weight 100 grams Maximum ambient temperature 100 °C]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/5/image_display.jpg</product_icon>
    <product_brand_id>2</product_brand_id>
    <product_price>855.2100</product_price>
    <product_price_ex_tax>777.46363636364</product_price_ex_tax>
    <product_price_local_tax>855.2100</product_price_local_tax>
    <product_created_datetime>2022-11-14 10:45:55</product_created_datetime>
    <product_code>61301</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_inventory_level>4</product_inventory_level>
    <product_uri>/products/motec-motec-ltcd-61301/</product_uri>
  </product>
</root>
