<?xml version="1.0" encoding="UTF-8"?>
<root>
  <product>
    <product_id>116</product_id>
    <product_title><![CDATA[KnockLink G4 (G4KNL)]]></product_title>
    <product_content><![CDATA[KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the Knock Sensor and Loom.The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other systems require time consuming gain, frequency and noise settings to be adjusted. Without proper knock listening tools, this can prove difficult if not impossible. The KnockLink requires none of this, just wire in and start the engine.Even light detonation will damage an engine over time. The G4 KnockLink's microprocessor continuously scans the knock signal and warns for any knock occurring. The engine's RPM and load is automatically 3D profiled by the KnockLink, continuously storing and dynamically adjusting this noise profile map while looking for the particular knock frequency.Operation is simple. The colour of the LED represents four different modes:Dim Blue - KnockLink is powered, waiting for the engine to be started Flashing Blue - KnockLink has detected the engine has started and is now calibrating Dim Green - KnockLink is adapting to the engine's noise profile and listening for knock Flashing Red - KnockLink has detected knock. Avoid large throttle openings, seek professional advice]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/116/G4KNL.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>341.0000</product_price>
    <product_price_ex_tax>310</product_price_ex_tax>
    <product_price_local_tax>341.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:49:18</product_created_datetime>
    <product_code>114-1000</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-knocklink-g4-g4knl-114-1000/</product_uri>
  </product>
  <product>
    <product_id>115</product_id>
    <product_title><![CDATA[Knock Sensor (KNS)]]></product_title>
    <product_content><![CDATA[Donut style 8mm hole Includes plug and pin kit]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/115/KNS.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>148.5000</product_price>
    <product_price_ex_tax>135</product_price_ex_tax>
    <product_price_local_tax>148.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:48:06</product_created_datetime>
    <product_code>101-0053</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-knock-sensor-kns-101-0053/</product_uri>
  </product>
  <product>
    <product_id>114</product_id>
    <product_title><![CDATA[Knock Sensor with Loom (KNSB)]]></product_title>
    <product_content><![CDATA[Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/114/KNSB.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>165.0000</product_price>
    <product_price_ex_tax>150</product_price_ex_tax>
    <product_price_local_tax>165.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:47:00</product_created_datetime>
    <product_code>101-0054</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-knock-sensor-with-loom-knsb-101-0054/</product_uri>
  </product>
  <product>
    <product_id>113</product_id>
    <product_title><![CDATA[KnockBlock G4+ (KNB)]]></product_title>
    <product_content><![CDATA[The G4+ KnockBlock is an essential tool for tuning and can aid in the early detection of incorrect ignition timing, lean air/fuel mixtures and mechanical issues. It is used it with ear buds, headphones or noise cancelling ear muffs and features special filtering to allow you to listen in and detect knock early. Listen to one or two knock sensors Special filtering design improves signal to noise ratio Can be used with ear-buds, headphones or noise cancelling ear muffs Long life lithium rechargeable battery Rugged CNC aluminium enclosure Flying lead headphones connector Can be used with all OEM knock sensors Can be used to interface directly to a laptop for recording of engine noise or knock sensor frequency analysis (using PCLink G4+) Please note headphones with their own noise filtering may be unsuitable for use with the knock block.What’s in the Box?G4+ KnockBlock2 sensor looms (attached)1 headphone loom (attached)Quick Start Guide1 USB cable mini2 Bosch type doughnut OEM knock sensors2 small Link Engine Management stickersSpecifications:OperatingInstall the knock sensor/s in a suitable location on the engine (typically on a solid mounting point on the block near the cylinder head)If only using one sensor, leave the unused sensor cable disconnectedTurn the volume control clockwise until it clicks. The LED indicator will turn blue when the KnockBlock is operatingTurn the volume to the minimum setting (most anti-clockwise)Connect headphones to the 3.5mm audio jackRun the engine and carefully increase the volume (clockwise) until engine mechanical noise can be heard. Adjust to a comfortable listening volumeChargingTurn off the KnockBlock by turning the volume control anti-clockwise until it clicksConnect the USB charging cable to the KnockBlock’s Mini USB connector. Can be charged from any standard USB charger PC, laptop, car or cell phone charger (2.1A at 5V max)The LED indicator will show red while charging. When the indicator turns off the battery is fully chargedCharge the G4+ KnockBlock after use and before storage]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/113/KNB.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>748.0000</product_price>
    <product_price_ex_tax>680</product_price_ex_tax>
    <product_price_local_tax>748.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:45:37</product_created_datetime>
    <product_code>105-1000</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-knockblock-g4-knb-105-1000/</product_uri>
  </product>
  <product>
    <product_id>112</product_id>
    <product_title><![CDATA[G4 KnockLink Kit - Includes Knock Sensor+Loom (G4KNLK)]]></product_title>
    <product_content><![CDATA[Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only detonation warning device on the market that requires no setup. Other systems require time consuming gain, frequency and noise settings to be adjusted. Without proper knock listening tools, this can prove difficult if not impossible. The KnockLink requires none of this, just wire in and start the engine.Even light detonation will damage an engine over time. The G4 KnockLink's microprocessor continuously scans the knock signal and warns for any knock occurring. The engine's RPM and load is automatically 3D profiled by the KnockLink, continuously storing and dynamically adjusting this noise profile map while looking for the particular knock frequency.Operation is simple. The colour of the LED represents four different modes:Dim Blue - KnockLink is powered, waiting for the engine to be started Flashing Blue - KnockLink has detected the engine has started and is now calibrating Dim Green - KnockLink is adapting to the engine's noise profile and listening for knock Flashing Red - KnockLink has detected knock. Avoid large throttle openings, seek professional advice]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/112/G4KNLK.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>489.5000</product_price>
    <product_price_ex_tax>445</product_price_ex_tax>
    <product_price_local_tax>489.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:43:24</product_created_datetime>
    <product_code>114-2000</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-g4-knocklink-kit-includes-knock-sensorloom-g4knlk-114-2000/</product_uri>
  </product>
  <product>
    <product_id>111</product_id>
    <product_title><![CDATA[8 Bar MAP Sensor EU (MAP8EU)]]></product_title>
    <product_content><![CDATA[The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or 101psi) of boost pressure. Includes Plug and Pins Push wire through connector; crimp on terminal; pull wire/terminal back into connector Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Variohm 8 Bar’ Calibration - 0kpa = 0.5v, 800kpa = 4.5vPIN A = 0vPIN B = 5vPIN C = Signal]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/111/101-0298.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>361.9000</product_price>
    <product_price_ex_tax>329</product_price_ex_tax>
    <product_price_local_tax>361.9000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:39:53</product_created_datetime>
    <product_code>101-0298</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-8-bar-map-sensor-eu-map8eu-101-0298/</product_uri>
  </product>
  <product>
    <product_id>110</product_id>
    <product_title><![CDATA[5 Bar MAP Sensor EU (MAP5EU)]]></product_title>
    <product_content><![CDATA[The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure.This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or 58psi) of boost pressure.Includes Plug and Pins Push wire through connector; crimp on terminal; pull wire/terminal back into connector Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Variohm 5 Bar’ Calibration - 0kpa = 0.5v, 500kpa = 4.5vPIN A = 0vPIN B = 5vPIN C = Signal]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/110/101-0295.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>328.9000</product_price>
    <product_price_ex_tax>299</product_price_ex_tax>
    <product_price_local_tax>328.9000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:38:47</product_created_datetime>
    <product_code>101-0295</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-5-bar-map-sensor-eu-map5eu-101-0295/</product_uri>
  </product>
  <product>
    <product_id>109</product_id>
    <product_title><![CDATA[1.15 Bar MAP Sensor (MAP1.15)]]></product_title>
    <product_content><![CDATA[The Link 1.15 Bar MAP sensor reads up to 1.15 Bar absolute pressure. This means it is suitable for use in naturally aspirated engines. This MAP sensor can also be used in applications where positive intake pressures of up to 0.15 Bar (approx 2 PSI) are expected (eg. Ram-air effect). The wiring pinout for this sensor is marked directly on the housing.Includes 3-pin Deutsch DTM connector kit Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to. Compact aluminium enclosure Very high resolution readings for naturally aspirated engines Mechanical connection via 4mm (3/16″) hose connector nipple. Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 1.15 Bar’]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/109/MAP1.15L.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>187.0000</product_price>
    <product_price_ex_tax>170</product_price_ex_tax>
    <product_price_local_tax>187.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:37:26</product_created_datetime>
    <product_code>101-0162</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-115-bar-map-sensor-map115-101-0162/</product_uri>
  </product>
  <product>
    <product_id>108</product_id>
    <product_title><![CDATA[2.5 Bar MAP Sensor (MAP2.5)]]></product_title>
    <product_content><![CDATA[The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor.Includes 3-pin Deutsch DTM connector kit Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to. Compact aluminium enclosure Mechanical connection via 4mm (3/16″) hose connector nipple. Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 2.5 Bar’]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/108/MAP2.5L.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>192.5000</product_price>
    <product_price_ex_tax>175</product_price_ex_tax>
    <product_price_local_tax>192.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:36:14</product_created_datetime>
    <product_code>101-0163</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-25-bar-map-sensor-map25-101-0163/</product_uri>
  </product>
  <product>
    <product_id>107</product_id>
    <product_title><![CDATA[Link 4 Bar MAP Sensor (MAP4)]]></product_title>
    <product_content><![CDATA[The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this sensor is marked directly on the sensor.Includes 3-pin Deutsch DTM connector kit Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to. Compact aluminium enclosure Mechanical connection via 4mm (3/16″) hose connector nipple. Using Link G4/G4+/G4X ECU’s just select the MAP sensor type in PC Link as ‘Link 4 Bar’]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/107/MAP4L.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>209.0000</product_price>
    <product_price_ex_tax>190</product_price_ex_tax>
    <product_price_local_tax>209.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:34:56</product_created_datetime>
    <product_code>101-0165</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-link-4-bar-map-sensor-map4-101-0165/</product_uri>
  </product>
  <product>
    <product_id>106</product_id>
    <product_title><![CDATA[3 Bar MAP Sensor (MAP3)]]></product_title>
    <product_content><![CDATA[This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is indicated on the sensor.Includes Deutsch 3-pin connector kit Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to. Compact aluminium enclosure Mechanical connection via 4mm hose connector nipple Using Link G4/G4+/G4X ECU’s select the MAP sensor type in PC Link as ‘Link 3 Bar’]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/106/MAP3L.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>198.0000</product_price>
    <product_price_ex_tax>180</product_price_ex_tax>
    <product_price_local_tax>198.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:33:19</product_created_datetime>
    <product_code>101-0164</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-3-bar-map-sensor-map3-101-0164/</product_uri>
  </product>
  <product>
    <product_id>105</product_id>
    <product_title><![CDATA[Exhaust Gas Temperature Probe (EGT)]]></product_title>
    <product_content><![CDATA[Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected wires Designed for extreme engine test & racing environments When using this with an ECU other than the Thunder, you will need to use an amplifier.SpecificationsThermocouple type: KRange: -148 to 2372°F (-100 to 1300°C)Accuracy: +/-0.4% of reading or about +/- 1.1°C (Special Limits of Error)Probe diameter: 1/4 inch (0.250 inch) (6.35 mm)Sensing Junction: Exposed, UngroundedResponse Time*: 150 mS*Time Constant: Defined as the time required to reach 63.2% of an instantaneous temperature changeFive time constants are required to approach 100% of the step change valueOuter Sheath Material: Inconel, melting point 2550°F (1400°C)Cable: Stainless steel overbraiding over Teflon™ insulated, stranded wires, 20 gaugeCompression Fitting: 316 stainless steel, adjustable, 1/8 inch –27 NPT male threadWiring: + = Yellow – = Red]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/105/EGT-Probe.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>203.5000</product_price>
    <product_price_ex_tax>185</product_price_ex_tax>
    <product_price_local_tax>203.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:31:36</product_created_datetime>
    <product_code>101-0146</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-exhaust-gas-temperature-probe-egt-101-0146/</product_uri>
  </product>
  <product>
    <product_id>104</product_id>
    <product_title><![CDATA[CAN Lambda (CANLAM)]]></product_title>
    <product_content><![CDATA[Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link [CANPCB](http://dealers.linkecu.com/CANPCB_2) cable to access the CAN port on the PlugIn PCB and a Link [CANF](http://dealers.linkecu.com/CANF_2) field insertable CAN plug.Please note proper CAN protocol must be followed. See manual below for guidance.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/104/CAN-Lambda.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>605.0000</product_price>
    <product_price_ex_tax>550</product_price_ex_tax>
    <product_price_local_tax>605.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:30:03</product_created_datetime>
    <product_code>125-1000</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-can-lambda-canlam-125-1000/</product_uri>
  </product>
  <product>
    <product_id>103</product_id>
    <product_title><![CDATA[Tuning Cable (CUSB)]]></product_title>
    <product_content><![CDATA[Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with:Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ Xtreme Link G4+ Thunder All Link G4+ and G4X Plugin ECUs Link G4+ Storm Black/Blue/Silver Any older Link ECU utilising the Link 6 Pin CAN connector Vipec V88 and i44 Link G3]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/103/CUSB.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>82.5000</product_price>
    <product_price_ex_tax>75</product_price_ex_tax>
    <product_price_local_tax>82.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:26:57</product_created_datetime>
    <product_code>101-0001</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-tuning-cable-cusb-101-0001/</product_uri>
  </product>
  <product>
    <product_id>102</product_id>
    <product_title><![CDATA[Cable (CANDASH)]]></product_title>
    <product_content><![CDATA[## Blue wire removed ##Link CAN Connector to flying leads. Can be used for custom applications – Please contact our tech support to check compatibility/suitability.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/102/CANDASH.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>88.0000</product_price>
    <product_price_ex_tax>80</product_price_ex_tax>
    <product_price_local_tax>88.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:25:03</product_created_datetime>
    <product_code>101-0019</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-cable-candash-101-0019/</product_uri>
  </product>
  <product>
    <product_id>101</product_id>
    <product_title><![CDATA[Plug (CANF)]]></product_title>
    <product_content><![CDATA[Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/101/CANF.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>44.0000</product_price>
    <product_price_ex_tax>40</product_price_ex_tax>
    <product_price_local_tax>44.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:23:02</product_created_datetime>
    <product_code>101-0020</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-plug-canf-101-0020/</product_uri>
  </product>
  <product>
    <product_id>100</product_id>
    <product_title><![CDATA[Cable (CANPCB)]]></product_title>
    <product_content><![CDATA[Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/100/CANPCB.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>63.8000</product_price>
    <product_price_ex_tax>58</product_price_ex_tax>
    <product_price_local_tax>63.8000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:21:45</product_created_datetime>
    <product_code>101-0022</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-cable-canpcb-101-0022/</product_uri>
  </product>
  <product>
    <product_id>99</product_id>
    <product_title><![CDATA[Tuning Cable (CANSER)]]></product_title>
    <product_content><![CDATA[Link CAN to Serial (DB9 Female connector) Tuning Cable. Used to connect ECU to a computer with a serial interface (DB9 Male). A USB tuning cable is also available. Compatible with:Link G4X Storm Link G4X and G4+ Fury Link G4X and G4+ Xtreme Link G4+ Thunder Link G4+ Storm Black Link G4+ and G4X Plugin ECUs Any older Link ECU utilising the Link 6 Pin CAN connector]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/99/CANSER.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>88.0000</product_price>
    <product_price_ex_tax>80</product_price_ex_tax>
    <product_price_local_tax>88.0000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:20:40</product_created_datetime>
    <product_code>101-0023</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-tuning-cable-canser-101-0023/</product_uri>
  </product>
  <product>
    <product_id>98</product_id>
    <product_title><![CDATA[Cable (USBM)]]></product_title>
    <product_content><![CDATA[USB Mini Cable. Used to connect ECU to computer for tuning. Suitable for:G4X Atom G4X Monsoon G4+ Atom G4+ Kurofune G4+ Monsoon]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/98/USBM.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>38.5000</product_price>
    <product_price_ex_tax>35</product_price_ex_tax>
    <product_price_local_tax>38.5000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:19:23</product_created_datetime>
    <product_code>101-0104</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-cable-usbm-101-0104/</product_uri>
  </product>
  <product>
    <product_id>97</product_id>
    <product_title><![CDATA[Cable (CANJST4)]]></product_title>
    <product_content><![CDATA[Required to add CAN communications & power to recently released G4X Plugin ECU’s which have the new 4 Pin powered CAN connector (not the older 5pin CAN connector). Plugs directly into the socket on the ECU PCB, provides CAN and a protected 12V supply to allow easy connection of CAN accessories. Suitable for powering a CAN Lambda, Dash, EGT amplifier or other similar low powered CAN devices which have a total continuous current draw of <3A. Compatible PlugIns:233-4000 - PlugIn ECU G4X Honda S2000 AP1228-4000 - PlugIn ECU G4X Subaru WRX V5-6237-4000 - PlugIn ECU G4X Honda HC20X Type-R DC5/RSX238-4000 - Plugin ECU G4X Subaru WRX11239-4000 - Plugin ECU G4X MX5NB2X240-4000 - Plugin ECU G4X MX5NB1XSpecsDTM4 Male to JST4. 12V and GND Terminated to JST4. Length 300mmDTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/97/CANJST4-Link-CAN-Connection-Cable-for-PlugIn-ECUs.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>56.1000</product_price>
    <product_price_ex_tax>51</product_price_ex_tax>
    <product_price_local_tax>56.1000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:18:02</product_created_datetime>
    <product_code>101-0198</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-cable-canjst4-101-0198/</product_uri>
  </product>
  <product>
    <product_id>96</product_id>
    <product_title><![CDATA[CANJST - Link CAN Connection Cable for G4X/G4+ Plug-in ECU’s]]></product_title>
    <product_content><![CDATA[Used to add CAN communications to G4+/G4X Plugin ECU’s which have a 5 Pin CAN connector. Plugs directly into the CAN socket on the ECU PCB. 12V and Ground via flying lead. Terminates to a DTM4 Male Connector which is compatible with other Link CAN accessories including the CAN Extension cable (CANEXT) and CAN Splitter Cable (CANTEE) Not compatible with the below PlugIns (these require a CANJST4 Cable):233-4000 - PlugIn ECU G4X Honda S2000 AP1228-4000 - PlugIn ECU G4X Subaru WRX V5-6237-4000 - PlugIn ECU G4X Honda HC20X Type-R DC5/RSX238-4000 - Plugin ECU G4X Subaru WRX11239-4000 - Plugin ECU G4X MX5NB2X240-4000 - Plugin ECU G4X MX5NB1XSpecsDTM4 Male to JST4. 12V and GND Terminated to JST5. Length 300mmDTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/96/101-0197.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>56.1000</product_price>
    <product_price_ex_tax>51</product_price_ex_tax>
    <product_price_local_tax>56.1000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:17:00</product_created_datetime>
    <product_code>101-0197</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-canjst-link-can-connection-cable-for-g4x-g4-plug-in-ecus-101-0197/</product_uri>
  </product>
  <product>
    <product_id>95</product_id>
    <product_title><![CDATA[CANSS - CAN Connection Cable for G4X/G4+ WireIn ECU’s (ECU Header CAN)]]></product_title>
    <product_content><![CDATA[Required to add CAN communication to WireIn ECU's which have CAN accessible via the Header. Compatible ECU's:G4X/G4+ Atom (CAN1)G4X/G4+ Monsoon (CAN1)G4X/G4+ Storm (CAN2)G4X/G4+ Xtreme (CAN2)G4X/G4+ Fury (CAN2)G4+ Force (CAN2)G4+ Thunder (CAN2)SpecsDTM4 Male to Flying leads. CAN H & L crimped with Superseal terminals. 12V & GND Flying Leads. Length: CAN Loom length 300mm (Flying leads 500mm long)DTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/95/101-0210.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>53.9000</product_price>
    <product_price_ex_tax>49</product_price_ex_tax>
    <product_price_local_tax>53.9000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:14:26</product_created_datetime>
    <product_code>101-0210</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-canss-can-connection-cable-for-g4x-g4-wirein-ecus-ecu-header-can-101-0210/</product_uri>
  </product>
  <product>
    <product_id>94</product_id>
    <product_title><![CDATA[CANLTW - CAN Connection Cable for G4X/G4+ WireIn ECU’s (6 Pin CAN)]]></product_title>
    <product_content><![CDATA[Required to add CAN communication to WireIn ECU's which have CAN accessible via the 6 Pin round CAN connector on the front of the ECU. Compatible ECU's:G4X/G4+ Xtreme (CAN1)G4X/G4+ Fury (CAN1)G4+ Force (CAN1)G4+ Thunder (CAN1)SpecsDTM4 Male to LTW 6 pin. 12V & GND Flying Leads. CAN Loom Length 300mm (Flying lead length 500mm)DTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/94/101-0211.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>74.8000</product_price>
    <product_price_ex_tax>68</product_price_ex_tax>
    <product_price_local_tax>74.8000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:13:14</product_created_datetime>
    <product_code>101-0211</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-canltw-can-connection-cable-for-g4x-g4-wirein-ecus-6-pin-can-101-0211/</product_uri>
  </product>
  <product>
    <product_id>93</product_id>
    <product_title><![CDATA[CANTEE - Link CAN Splitter Cable]]></product_title>
    <product_content><![CDATA[CAN Splitter Cable for connecting an additional CAN devices.Use to connect from a CANJST, CANLTW or CANSS into 2 CAN devices.SpecsDTM4 Female to 2 x DTM4 Male. Includes CAN and Power Wiring. Loom 1 Length: 80mm Loom 2 Length: 120mmDTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/93/101-0212.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>69.3000</product_price>
    <product_price_ex_tax>63</product_price_ex_tax>
    <product_price_local_tax>69.3000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:11:52</product_created_datetime>
    <product_code>101-0212</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-cantee-link-can-splitter-cable-101-0212/</product_uri>
  </product>
  <product>
    <product_id>92</product_id>
    <product_title><![CDATA[CANEXT - Link CAN Extension Cable 2m]]></product_title>
    <product_content><![CDATA[2 meter CAN Extension Cable for increased reach between your ECU CAN cable and CAN splitter/s or CAN device/s.SpecsDTM4 Female to DTM4 Male. Includes CAN and Power Wiring.Length: 2 metresDTM4 Pin OutPin 4: CAN HPin 3: CAN LPin 2: GroundPin 1: 12V]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/92/101-0214.0.jpg</product_icon>
    <product_brand_id>3</product_brand_id>
    <product_price>69.3000</product_price>
    <product_price_ex_tax>63</product_price_ex_tax>
    <product_price_local_tax>69.3000</product_price_local_tax>
    <product_created_datetime>2022-11-25 07:10:38</product_created_datetime>
    <product_code>101-0214</product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/link-canext-link-can-extension-cable-2m-101-0214/</product_uri>
  </product>
</root>
